Your architectural and structural drawings have made it through initial review, and then a separate set of comments comes back from an entirely different reviewer, the fire marshal or fire prevention division, flagging issues that were not addressed in your original submission at all. For many project owners, this is the first sign that fire code review operates as its own distinct track within the permit process, with its own reviewer, its own priorities, and its own capacity to delay a project regardless of how clean the rest of your drawing set is.
Fire code compliance is not simply one item on a general building code checklist, it is frequently reviewed by a separate authority with its own jurisdiction, sometimes a dedicated fire marshal’s office operating independently from the general building department, applying a distinct code, typically the International Fire Code or a state specific equivalent, alongside the building code itself. After a decade coordinating projects through both building and fire code review, I want to walk through what fire code review actually evaluates, why it operates somewhat separately from general plan check, and where projects most often generate avoidable corrections on this specific track.
Our team provides end-to-end architectural, structural, and MEP coordination to ensure your plans are compliant and ready for approval. Don’t let documentation delays hold you back.
Ready to turn your vision into a permit-ready project?
Why Fire Code Review Is a Distinct Process
Fire code requirements are typically reviewed by a fire marshal or fire prevention authority, which may be part of the building department or an entirely separate agency depending on jurisdiction, applying a fire specific code that addresses egress, fire suppression, fire alarm systems, fire rated construction, and emergency vehicle access. This review often runs on a parallel or sequential track alongside general building plan check, which means a project can pass architectural and structural review while still facing outstanding fire code corrections that independently hold up permit issuance.
This separation exists because fire code addresses a different, though related, category of risk than general structural and life safety code, specifically fire growth, suppression, and emergency response, and many jurisdictions maintain specialized fire prevention staff with expertise specific to this discipline, separate from general plan check reviewers.
What Fire Code Review Actually Evaluates
Means of Egress
This covers exit pathways, travel distance to an exit, exit width based on occupant load, and the number of required exits for a given space. Fire code and building code egress requirements are closely related but reviewed with a fire specific lens, particularly around exit signage, emergency lighting, and pathway obstruction requirements during actual emergency conditions.
Fire Suppression Systems
Sprinkler system design, including density, coverage, and water supply calculations, is evaluated against the specific occupancy type and, for storage occupancies, the commodity classification and storage height involved. This is frequently the most technically demanding component of fire code review, since suppression requirements can vary significantly even between two buildings of similar size and general use.
Fire Alarm and Detection Systems
This addresses smoke detection, alarm notification, and, in larger or more complex buildings, integration with building systems like elevator recall and HVAC shutdown during a fire event. Alarm system design needs to be coordinated with the building’s actual occupancy classification and size, not applied as a generic standard.
Fire Rated Construction and Separation
This covers the fire resistance rating required for specific walls, floors, and structural elements, particularly at occupancy separations, exit corridors, and shaft enclosures. Fire rating requirements are tied directly to occupancy type and building size, and are one of the most common sources of correction when a wall assembly does not match a tested, rated assembly on file with a recognized testing standard.
Fire Apparatus Access
This addresses whether fire trucks and emergency vehicles can actually reach the building, access road width, turning radius, and proximity to the structure, and it is frequently one of the more site plan intensive fire code requirements, since it needs to be coordinated with overall site layout, not just the building itself.
Hazardous Materials Storage
For projects involving storage or use of specific hazardous materials, additional fire code provisions address quantity limits, storage configuration, and sometimes separate permitting specific to the materials involved, independent of the general building permit.
Why Fire Code Correction Comments Are Common Even on Well Designed Projects
Here is what surprises many project owners, a building can be architecturally sound and structurally well engineered while still generating significant fire code corrections, because fire code review evaluates a genuinely distinct set of technical criteria that general architectural design does not automatically satisfy. Egress width calculated correctly for general code purposes can still be insufficient once fire code specific occupant load factors are applied. A wall assembly that looks appropriately substantial can still fail to meet a specific tested fire rating if it was not designed against a recognized assembly from the start.
Common Mistakes We See in Fire Code Compliance
Not involving fire code review considerations until after architectural design is largely finalized. Egress width, fire rated separation locations, and apparatus access requirements all have real implications for building layout and site design, and addressing these only after the design is set often forces late, disruptive changes.
Assuming general building code egress calculations automatically satisfy fire code requirements. While closely related, fire code sometimes applies specific occupant load factors or additional requirements beyond the general building code baseline, and confirming both independently is worth the extra step.
Using a wall assembly that is not based on a recognized tested rated design. Fire rated construction needs to match a specific tested assembly, from a recognized testing laboratory or a manufacturer’s tested system, rather than an assumption that a certain thickness or material combination achieves a given rating without actual test data behind it.
Underestimating fire apparatus access requirements during site planning. This is particularly common on tighter urban infill sites, where achievable access road width and turning radius can conflict with other site planning priorities if not evaluated early.
Not coordinating suppression system design with actual storage or occupancy conditions. This is especially consequential for warehouse and storage occupancies, where commodity classification and storage height directly drive suppression requirements, and a generic suppression design not matched to actual use can trigger significant correction and redesign.
Treating fire alarm system integration as a separate afterthought from the electrical and mechanical design. Fire alarm systems often need to interface with elevator controls, HVAC shutdown sequences, and other building systems, and this coordination is more effective when addressed during design rather than reconciled after each discipline has already finalized their drawings independently.
How Fire Code Review Affects Your Permit Timeline
Because fire code review frequently operates on its own track, sometimes reviewed by staff physically separate from the general building department, an uncoordinated submission can generate a completely independent correction cycle that holds up your overall permit even after architectural and structural review has cleared. This is particularly consequential on larger commercial, multifamily, and storage occupancy projects, where fire code scrutiny tends to be most extensive.
A properly coordinated drawing set, developed with fire code requirements integrated into the architectural and life safety planning from the start, rather than addressed reactively once a separate fire marshal review flags issues, moves through this process considerably more efficiently.
What to Confirm Before Submitting for Fire Code Review
Before your drawing set moves toward submission, it is worth confirming a few things directly:
- Has egress been calculated using both general building code and fire code specific occupant load factors, where these may differ?
- Are fire rated wall, floor, and separation assemblies specified against actual recognized tested designs, not general assumptions?
- Has fire apparatus access been evaluated as part of site planning, not added as an afterthought once building design is finalized?
- For storage or warehouse occupancies, has suppression system design been coordinated with actual anticipated commodity classification and storage height?
- Has fire alarm system design been coordinated with electrical, mechanical, and elevator systems where applicable?
Resolving these questions before submission is one of the most effective ways to avoid an independent fire code correction cycle holding up an otherwise ready project.
Why Getting Fire Code Right Protects More Than Your Permit Timeline
Fire code compliance is fundamentally about life safety, protecting occupants’ ability to safely exit a building and giving emergency responders the access and system support they need during an actual event. Beyond the very real permit timeline consequences, getting this right is simply the correct priority for any building where people will live, work, or gather, and it deserves the same level of upfront coordination as structural or architectural design, not a reactive fix applied after a separate reviewer flags a gap.
If you are planning a project and want fire code requirements integrated into your design from the start, rather than addressed as a separate, disruptive correction cycle later, we would welcome the conversation. Book a consultation and let’s talk through what your specific project and occupancy type actually require.
Our team provides end-to-end architectural, structural, and MEP coordination to ensure your plans are compliant and ready for approval. Don’t let documentation delays hold you back.
Ready to turn your vision into a permit-ready project?
Fayaz
Frequently Asked Question - FAQs
No, though the two are closely related. Fire code is typically reviewed by a fire marshal or fire prevention authority, sometimes a separate agency from the general building department, applying its own specific code addressing suppression, alarm systems, egress, and emergency access, often on a distinct review track from general architectural and structural plan check.
This happens because fire code evaluates a distinct set of technical criteria, including fire specific occupant load factors, tested rated assembly requirements, and suppression system design, that general architectural and structural review does not automatically address in the same depth.
A tested rated assembly is a specific wall, floor, or construction configuration that has been physically tested and certified to achieve a specific fire resistance rating, typically by a recognized testing laboratory. Fire code requires rated construction to match one of these tested assemblies, rather than relying on an untested assumption that a similar looking configuration achieves an equivalent rating.
This depends on occupancy type, building size, and specific use, such as high piled storage, which often triggers sprinkler requirements regardless of overall building size. Requirements vary by jurisdiction and specific code edition in effect, so confirming this early in design is important rather than assuming based on a similar but different project.
The most effective approach is integrating fire code considerations, egress, suppression, rated construction, and apparatus access, into architectural and site design from the earliest stages, rather than treating fire code compliance as a separate review to address only after general building plan check is complete.